HOME

GENERAL INFORMATION

MAGAZINES

PRODUCT RANGES

PAINTED FIGURES

NEW RELEASES

SPECIALS

ORDER FORM

POSTAGE AND SHIPPING

VENI VIDI VICI

QUALITY TRANSFERS

STOCK  CLEARANCE

15mm Transfers are $4.25 per sheet. NOW  $2 PER SHEET

25mm Transfers are $7.25 per sheet. NOW $3.50 PER SHEET

POSTAGE AT COST

PLEASE CHECK AVAILABILITY BEFORE ORDERING. SOME ITEMS ARE NO LONGER AVAILABLE.

Veni Vidi Vici transfers are produced as a practical aid to painting your armies. Using transfers allows you to put the finishing touch to your figures very quickly.

Our water slide transfers are designed to fit the shields they are to be used on and come already shaped, including holes for shield bosses etc, so do not require cutting out. Each pattern takes about 6 - 8 hours of an artists time and is then reduced and printed to produce a result that few painters can match. We use Essex and Chariot figures as masters for our transfers. 

To apply transfers seperate the ones you want to use from the rest of the sheet. Soak them in a shallow dish of water for about half a minute. They should then slide easily off the backing paper onto the model (You can use a finger or modelling knife to do this). Move transfer to the position required, smooth it out and soak up excess water with a tissue. Leave to dry, overnight is best and then varnish over the top of the transfer to protect it. Don't worry if you crease or otherwise wreck the first transfers you apply, practice makes perfect.

TIPS

* Avoid the transfers floating off in the water, they are hard to catch! If this happens reduce time in water.

* If you have difficulty sliding the transfers into position, wet the surface of the model a bit. Transfers also are easier to apply to figures which are already varnished.

* Once a transfer is dry on the model (but before the final varnish) you can paint over it to create your own designs.

NOTE : Each range normally fits a number of transfers onto a sheet and we tell you how many figures you can do with one sheet. If there is a variation within a range the number of figures a sheet will do is given in brackets after the description/

MEDIEVALS

From the Crusades to 1300 these designs allow you to create your own early medieval armies with designs that would be very complex to paint. The knight sheets have a mix of designs but include five of each type to allow you to put one on each quarter of a horse cloth in addition to the sheild. More complex later patterns could be created by using 15mm transfers as the 'quarters' to a 25mm device. Each sheet does 24 figures.

15mm

M1 Knight    6 diff swan/roses/eagle/lion fluer/waves 
M2 Knight    6 diff 3 types lion/eagle/flower/fluer-de-lys
M3 Knight    Mix of 4 diff types crosses 
M4 Infantry    Round shield. Cross design. 
M5 Infantry    Teardrop shield. Waves design.
M6 Infantry    Teardrop shield. 2 headed eagle design.
M7 Infantry    Round shield. Flower design.
M8 Infantry    Teardrop shield. Swan design.
M9 Infantry    Round shield. 2 headed eagle design.
M10 Maltese cross.
M11 Spanish military orders.
M12 Fleur - de -Lys.

Available in red, black, white, yellow and navy. 

                                                                                                                   

25mm

MM1 Knight.    6 diff swan / roses / eagle / lion / fleur / waves.
MM2 Knight.    6 diff 3 types lion / eagle / flower / fleur-de-lys. 
MM3 Knight.    Mix of 4 diff types crosses.
MM4 Maltese Cross.
MM5 Spanish Military Orders.
MM6 Fleur-de-lys.

Available in red, black, white, yellow and navy.

 

DARK AGES

15mm

D1 Kite shields for Norman cavalry. Hole for boss. 10 diff designs (16)
D2 Kite shields for Norman inf. Hole for boss. 10 diff designs (16)
D3 Round Shield.

Available in black, red, white, yellow or navy.

 

25mm

DD1 Kite shield with hole for boss. 12 diff designs.
DD2 Kite shield without hole. 12 diff designs.
DD3 Round shield.
DD4 Round shield.
DD5 Kite shield.
DD6 Oval shield. 
DD7 Oval shield.
DD8 Oval shield.

Available in red, black, white, yellow and navy.

 

LATE ROMAN

For the 3rd / 5th century Roman armies and also the early Byzantines. All are oval designs for 20 figures. Part of the range are two colour designs as these armies tended to be more complex in their shield patterns.

The eagle design was for elite units. Alternate bands and star patterns for legionaries. Lion designs for auxilia. The other designs were used by many types of units in different colour combinations. 

 

15mm

L1 Alternate bands. L5 Eagle.
L2 Star design. L6 Chi-Ro.
L3 'U' design. L7 'U' plus Chi-Ro.
L4 Sun ray.    
All of the above are available in white, black, red, light blue, green, yellow or purple.

 

15mm Two Colour

L10 Spoke design. L12 Sun ray. 
L11 Lion. L13 Alternate bands. 
Available in red, red/yellow, red/black, red/blue, green/blue or green/yellow.

 

25mm

LL1 Alternate Bands. LL4 Eagle design.
LL2 Star design. LL5 Chi-Ro. 
LL3 Sun ray. LL6 Twin serpents.
All of the above are available in: white, black, red, light blue, green, yellow or purple.

                                                                                         

25mm Two Colour

LL10 Spoke design. LL12 Sun ray.
LL11 Lion.  LL13 Alternate Bands.
Available in: red/yellow, red/black, red/blue, green/blue or green/yellow.

 

HELLENICTIC

Covers the early Greeks to the armies of Alexander's successors, also Carthaginians and early Italian states. Most designs are circular but we also have two different sizes of pelta (crescent) shield. All sheets do 24 figures.

 

15mm

G1 Bird.  G10 Winged Foot.
G2 Bulls Head.  G11 Spartan.
G3 Club. G12 Seleucid Design.
G4 Cup. G13 Star and Surround.
G5 Dolphin. G14 Mixed. Star / Tri / Snake / Boar.
G6 Macedonian Star. G15 Mixed. Gorgon / A / Bull / Lion.
G7 *Discontinued*. G16 Pelta. 6 diff. Designs.
G8 Palm Tree. G17 Small Pelta. 6 designs.
G9 Trident.
All the above are available in ; White, black, red , light blue, green, yellow or purple.

     

25mm

GG1 Macedonian star. GG5 Spartan.
GG2 Bulls head. GG6 Star and surround. 
GG3 Cup. GG7 Seleucid design.
GG4 Star surround. GG8 Mix of 8 diff designs.

Available in black, white or red.

  

FANTASY

The start to an expanding range of fantasy transfers. FF 1 is also useful for historical figures but is included here because if the extra colours available.

 
25mm
FF1 Star, Boars head, Octopus, Gorgon, Bulls head, Lion.
FF2 Cobra, Spider and web, Wolf, Clawed hand, Octopus, Gorgon.

Available in red, black, white, yellow and blue.

 

BARBARIANS

Just right for your barbarian warband. These sheets have a mix of designs suitable for your Gallic, Germans or Spanish. They come in two halves to fit round bosses and spines. Why not mix and match the two halves to create your own patterns? Each sheet does 16 figures. 

 

15mm

B1 Long 'straight sided' shields, common Gallic/German.
B2 Oval design, common Spanish type.
B3 "Fat" Oval, almost round.

Available in red, black, white, green, blue or yellow.

 

25mm

BB1 A mix of shield shapes and patterns. Does 20 figures.

Available in red, black, white, green, blue or yellow.

    

IMPERIAL ROMAN

For armies of the 1st / 2nd centuries A.D. Two types of transfer are available; rectangular for legionaries and oval for auxilia / cavalry. The legionary transfers are in two halves to allow for different shield bosses and possibly a spine down the front of the shield. Each sheet normally does 20 figures. 

 

15mm

R8 Auxiliary Crescent. 
R9 Auxiliary Laurel. Ver 2.
R3 Auxiliary Wreaths (12).  R10 Marine with hole for boss.
R11 Marine without hole.
R5 Legionary Laurel R12 Praetorian 1. 
R6 Auxiliary Eagle R13 Praetorian 2. 
R7 Auxiliary Star R14 Praetorian 3. 

The above are available in white, yellow or red.

 

25mm

RR1  Legionary Thunderbolt. RR7 Legionary Thunderbolt 2.
RR2 Legionary Laurel. RR8 Auxilia Laurel. 
RR3 Legionary Laurel. Ver 2. RR9 Praetorian 1. 
RR4 Auxiliary Eagle. RR10 Praetorian 2.
RR5 Auxiliary Star. RR11 Guard cavalry.
RR6 Auxiliary Crescent.    

The above are available in white, yellow or red.

NOTE : RR3 should only be used on shields that have a spine.

 

ASIAN

15mm

A1  Takeda Mon.  A5 Takeda Generals.
A2 Sanada Mon.  A6  Uesugi Generals.
A3 Fujiwara Mon. A7 Uesugi Generals II.
A4 minamoto Mon.    

 
25mm
AA1 Takeda.  AA5 Takeda Generals. 
AA2 Sanada. AA6 Uesugi Generals. 
AA3 Fujiwara.  AA7 Uesugi Generals II.
AA4 Miniamoto. 

                                                                                                          

EXTRAS

15mm

X1    Large Chariot.    X2    Small Chariot.

                                                                                          

HEROES

25mm

HE1 Warrior Design.  HE3 Dwarf Design.
HE2 Warrior Design. HE4 Elf Design.

 

 

 

  
   
 
.
                                 Essex Miniatures Australia
                                                22 Sydney Road
                                        Hornsby Heights, 2077

                                        Tel: (02) 9477 6696
                                      
                                   Email: essexminiatures@optusnet.com.au
 
                                           HOME